Plastic Buckets Range——0.15L -2L Jars With Screw Lids&Tear Strip Lids

Description of Various Jars：

Materials for sizes ranging from 150ml to 2L are all PP material; Made of Hengli K8003 material.Sizes from 150ml to 1L can be made of PE material, with a minimum order quantity of 20,000 provided there is sufficient demand.

A.Properties of PP: High hardness, strong adhesion, impact resistance. Heat resistant and can withstand lubricants. Suitable for printing customers. Heat resistance up to 120°C, deformation may occur above 80°C.

B.Properties of PE: Relatively soft, smooth surface, high gloss, flexibility. Resistant to low temperatures, suitable for cold chains. Not suitable for printing customers. Can withstand temperatures of -20°C to -40°C. PE is divided into HDPE and LLDPE, with high melt index and low melt index.

C.Screw cap cans: Primarily used in laboratories, without anti-theft function. Can be sold without inner seal; Can be sold with added gaskets, printing, or engraving.

Tear strip cans: Suitable for bulk orders, equipped with anti-theft function which screw cap cans lack. Can be sold without inner seal; Can be sold with added gaskets, printing, or engraving.

PS.Sizes from 150ml to 2L can be used with aluminum foil seals, provided the customer has a sealing machine; We can also introduce sealing machine manufacturers. Gaskets are available in PP-specific and PE-specific varieties. PP lids can only be used with PP gaskets, while PE lids can only be used with PE gaskets.We currently have 1L screw cap gaskets in stock; 2L cans require externally sourced screw cap gaskets.

Testing Methods:

Conventional testing: Fill with water and invert for 24 hours without leakage; Reverse testing involves filling with powder and soaking in water for 24 hours without clumping or moisture absorption to pass the sealing test; The most stringent drop test is dropping the can from a height of 1.5 meters, if it doesn't break or leak, it passes.

The national standard test is the most basic: It should not break or leak when dropped vertically from 1.2 meters, and should not leak when inverted for 24 hours.

Minimum Order：

1.Minimum order quantity for gaskets:150ml and 350ml: 20,000; 600ml and 1L: 10,000.

2.Breathable gaskets available: the breathability index is determined based on the degree of breathability.

3.Customization of can colors: black and white as standard colors and no minimum order quantity required. However, other colors besides black and white have minimum order requirements.

4.Regarding printing: Printing is available for sizes ranging from 150ml to 25L; Printing methods include screen printing, heat transfer printing, and in-mold labeling. Printing on the lid is also possible, with options including heat transfer printing and screen printing.

A. Screen printing process: Design artwork - Finalization - Screen making (charge of 40$ per screen) - Sampling (confirmation of samples with customers, signature confirmation) / confirmation via WeChat text is also acceptable - Mass production upon order placement - Payment required before delivery (printing orders do not offer credit terms, payment must be made in advance).

B. Heat transfer printing process: Design artwork - Quotation after finalization and color separation - Screen and film making (charge of 80$ per screen, one-time screen fee, film fee of 550$ per 1,000 square meters) - Sampling (confirmation of samples with customers, signature confirmation) / confirmation via WeChat text is also acceptable - Mass production upon order placement - Payment required before delivery (printing orders do not offer credit terms, payment must be made in advance).

C. Calculation method for film fee: 1000 square meters ÷ length in cm ÷ width in cm = 1000 ÷ 0.93 ÷ 0.28 = 3840 sheets, rounded down to 3800 sheets. The calculation for in-mold labeling is the same, but there is higher wastage, so it is rounded to around 200 sheets.

D. Steps for opening the mold: Provide 3D drawings (product weight, material) / Ship physical products - Calculate weight and provide quotation based on the number of molds needed for production capacity. Quotation will be provided within 3 days after receiving the shipment.